How To Make Scars With Makeup

When cosplaying, many characters have scars that you want to replicate for your costume. Unless you take feel in the earth of special effects makeup, y'all probably have no inkling where to start. I know I didn't! The good news is, creating basic cuts and scars is not all that difficult.

For basic scars, the best product to utilize is rigid collodion. This creates an indented look in your skin and requires minimal makeup application. To create large or complex scars, liquid latex is the best solution since information technology offers the most versatility.

Equally you learn the techniques and experiment with new looks, you'll get better and improve at creating realistic scars for your cosplay past combining these products with makeup application. These three methods will give y'all the nuts to get started, but you'll want to learn from them to make the basic materials work for you.

---

This folio contains affiliate links. As an Amazon Acquaintance, I earn a modest commission from qualifying purchases.

---

Method one: Indented cuts and scars

The easiest fashion to create realistic scars is to use a production called rigid collodion. This is a liquid that you tin can castor onto areas of your skin. As it dries, it puckers your skin together to create the appearance of an indented cut or scar without damaging your skin in any way. Combined with a little bit of makeup, for color effect, you tin make realistic scars very rapidly.

In full general, this is a rubber product to apply. You can experience comfy creating cuts and scars on your arms, chest, face, or wherever. Notwithstanding, for safety, y'all do desire to avoid putting rigid collodion straight over your eyelids.

How to use rigid collodion to create cuts and scars

All you need to get started is some rigid collodion, some cherry-colored makeup, and a translucent setting powder. You lot tin apply foam, powder, pencil, or whatever kind of makeup y'all have bachelor. Brighter red colors are good to apply for fresh cuts and scars. Slightly older scars will be a more cerise-purple color, and very one-time scars volition accept a pink or white appearance. So, cull the colors you use based on the type of scar you are trying to create.

1. Using makeup, put a line on where you lot want your scar to go. Use a brighter red for fresher cuts and scars, royal for older scars, and pink or white for matured scars.
2. Layer rigid collodion over the line. Normally, it comes with a brush like nail polish. Only wipe a sparse layer of the liquid over the line you lot created.
3. Let it dry. After it dries, yous tin add together some other layer of color makeup if you want a fresher wound look.
4. Add more rigid collodion to the area where yous desire the scar to be deeper. The more than layers of rigid collodion you add, the deeper the indent will look. For a minor scar, I will usually add iii layers, but you can continue to make the scar deeper or more intricate.
5. Use a setting pulverisation over top to remove the shininess. The rigid collodion will get out a shiny look on the surface of your skin. Using matte translucent powder should reduce this to make information technology look a lot more similar skin.
6. Utilize foundation for a slightly more healed look. If you want the scar to look a little older, you lot can too use your regular foundation to cover it and alloy it into your face up. It volition even so have the indented wait but volition appear more than healed.

Creating a scar with rigid collodion.

To remove the scar from your face, all you have to practise is peel it off. There is no special remover product that y'all need to purchase. There isn't fifty-fifty a pregnant corporeality of that ripping off a bandaid feeling, so removing the rigid collodion is pretty pain-costless. If you added a lot of makeup to the area, y'all may desire to also wipe information technology off with makeup remover.

Method 2: Uncomplicated makeup scars

You lot tin also create scars by simply drawing them on with makeup. This method is ideal for scars that are very close to or on elevation of an eye. It can as well exist used to depict on old scars that would not take a raised or indented appearance on the skin. Information technology works great for simple anime scars too.

Since this method only uses makeup, there aren't any limits to where you can identify the scar. Wherever you would normally use makeup is fair game for creating these scars.

How to create simple scars with makeup

All you need for creating these simple scars is three or four different shades of foundation or concealer and some setting pulverization (or setting spray). You'll want one shade that is lighter than your skin tone, ane that is darker, and i that matches. You can also include some other shade with some pinkish undertones. I observe information technology easier to utilize cream-based makeup for this, however, you can use multiple shades of powder eyeshadow if that's what you have bachelor. I got this palette with different pare tones in cream colors so that I had many different shades available.

1. Make a line (or shape) for your scar with makeup that is lighter than your skin tone. When doing this, I will make a line that is thicker in the middle and tapers at the end.
2. Use makeup that is darker than your skin tone to environment the light scar. Brand a thin border around the light color with the darker colored makeup. You don't want this to exist too thick or it will be hard to blend.
3. Use foundation in your normal pare tone around the light and dark scar. Then surroundings the dark layer with a neutral layer that is about the same shade equally your skin.
4. Lightly squiggle the 3 colors to blur the edges. You lot don't desire to completely blend the colors together, but make the borders between them wavy and blurred for a more natural-looking, healed scar. At this point, you can also add in some pink tone into the middle, lighter layer if you want to.
5. Alloy the outer color into your skin tone. Now y'all only have to gently alloy the outer layer to create a seamless transition between the scar and your face up.
6. Use a translucent powder to reduce the polish and set up the makeup. Once you're happy with the look, go over it with a matte setting powder. This will help to preclude any shine from the cream makeup, and it will work to continue the makeup from smudging too much.

Creating a simple scar with but makeup.

If you programme on wearing this for a long period of time at an anime convention, y'all might want to bring supplies to touch on it upward occasionally. The setting powder helps information technology stay in identify a lot, but it'southward non a perfect solution. To remove the scar at the end of the day, simply wipe it off with any makeup remover that you would normally utilise.

Method 3: Big fire scars

Liquid latex is the well-nigh versatile method for creating scars, cuts, and any kind of special effects makeup. You can employ it to create large burn scars, like for Zuko or Todoroki, merely you lot tin also utilize it for realistic zombie makeup or whatever number of other effects on your skin.

Of the 3 methods, liquid latex is the virtually inconvenient product to apply. Be very careful using the product around your eyes. Avert the eyelid and at to the lowest degree one-half an inch around the vicinity of your eye to prevent any accidents. You tin can use makeup to cover these areas after the latex is applied.

If y'all don't prep the skin, liquid latex will stick to your hairs making information technology painful to remove. Some people volition shave the peel in the area where the liquid latex will be applied. I find it's just equally constructive to add together a thin layer of vaseline (petroleum jelly) to the skin. If you will exist adding liquid latex effectually your eyebrow, use a glue stick to seal the hairs on your brow.

Y'all'll also demand to apply divide disposable sponges to utilize the liquid latex. It starts to dry fairly quickly, and will completely ruin any brushes that you use with the product.

Some people also have latex allergies and don't realize information technology. This can be a pretty astringent allergy, then always do a test on a modest area of your arm before applying a large amount of latex to your skin or anywhere virtually your face up. Look at least 30 minutes after the latex dries on your skin to ensure yous don't kickoff developing a rash.

How to brand a big scar with liquid latex

To brand a burn scar with liquid latex you'll need a bottle of the latex, a tissue, cream makeup (in the cherry to dark-brown spectrum), and translucent setting powder. Yous can also use powdered makeup to layer on top of the cream, only the powdered colors won't adhere well to the latex prosthetic.

1. Apply a thin layer of vaseline to the skin. This will brand it a lot less painful to peel the latex off later on you're finished wearing it. Other options are to use a thick moisturizer or shave the expanse where the latex will be applied. Avoid using also much, because that can prevent the liquid latex from adhering to your peel at all.
2. Rip upward a tissue into small pieces. This will exist used to give texture to the surface of your scar.
3. Apply a layer of liquid latex. Liquid latex tin can be layered on top of itself for a more textured result. Spread this first, thin layer over the entire area of your desired scar and so that you tin build off of it. Make certain you're using dispensable sponges then that you lot don't ruin your regular makeup brushes.
4. Using more latex, paste pieces of tissue over the first layer of latex. Apply the pieces of tissue y'all tore up and layer them 1-by-one onto the scar shape. Paste them down with more liquid latex, and make certain there is some overlap from the pieces. Continue doing this until yous've created a large, textured scar shape that you're happy with.
5. Let the latex dry earlier applying makeup. Liquid latex volition dry relatively rapidly into a rubbery material. Withal, if you used many layers, information technology might accept half an hour or then earlier it's ready to move on to the next footstep.
6. Add foam makeup. Powder makeup does not adhere well to the latex layer, so you want to utilise a cream formula. If you lot're going for a burn scar, use a variety of burnt ruby, brown, and purple colors to create the desired effect.
7. Blend the edges with foundation. Make certain to blend the edges of the latex prosthetic using foundation, so information technology seamlessly transitions into your skin.
8. Utilise a translucent setting powder. One time your scar looks every bit desired, fix it with translucent powder. This takes away whatever shine, and it will ensure the makeup stays in place.

Creating a fire scar using liquid latex.

To remove the liquid latex scar, simply skin it off your skin. If you lot've taken steps to protect the pare underneath, this is a elementary procedure. If you lot haven't the latex will still peel off without a problem. However, information technology will exist like peeling a large bandaid off, and yous will probably exist left with a red, irritated marking on your skin that can take a few hours to fade away.

Products mentioned in this article

• Rigid Collodion
• Translucent pulverization
• Foam foundation palette
• Liquid latex
• dispensable sponges
• Trample colored cream makeup wheel

Source: https://cosplayadvice.com/cosplay-scars-with-makeup/

Posted by: brownswougge.blogspot.com

Share this post